Los módulos bases tienen una profundidad estándar de 60cm. esta medida considera que los costados tienen un ancho de 58cm a lo cual se suma la puerta con un espesor de 1,8cm. La cubierta debe siempre sobrepasar la medida de la profundidad del módulo de modo que si se derrama algún líquido en la cubierta, el líquido no goteara directamente sobre la madera. La profundidad del módulo puede disminuir para espacios que no tienen considerado artefactos. Sin embargo, no recomendamos disminuir la profundidad ya que generalmente se aplica para aquellas soluciones de cocina que no fueron pensadas desde un inicio.
Woodworking was essential to the Romans. It provided, sometimes the only, material for buildings, transportation, tools, and household items. Wood also provided pipes, dye, waterproofing materials, and energy for heat.[5]:1Although most examples of Roman woodworking have been lost,[5]:2 the literary record preserved much of the contemporary knowledge. Vitruvius dedicates an entire chapter of his De architectura to timber, preserving many details.[6] Pliny, while not a botanist, dedicated six books of his Natural History to trees and woody plants, providing a wealth of information on trees and their uses.[7]
En está ocasión, y aprovechando restos de madera de palets, vamos a hacernos una sencilla pero práctica y moderna base con ruedas para macetas. Y digo moderna, porque no tiene el típico diseño de listones de madera con las mismas dimensiones (en cuanto al grosor de las mismas). Para dar un toque distinto a la base, he decidido usar listones reciclados de restos de madera de palets, con diferentes ...
Simply soak a washcloth in water and ring it out a bit so it’s not sopping wet. Put the damp washcloth on the affected area. The water will wick through the wood, and that’s fine. Now, with your iron on its highest setting, place it on the damp washcloth over the affected area, and make small movements back and forth and in circles. Press down firmly and continue until your wash cloth is dry. It won’t take long to evaporate. At this point, the wood fibers are absorbing the water and should expand back to where they were originally. Continue this process and repeat by adding more water until the dents rise up to be flush with the rest of the material.

While trying to trace an exact copy of the throat plate for my table saw, I came up with this nifty technique using an ordinary pencil. I just shaved my pencil into a half-pencil by carefully grinding it on my belt sander. The flat edge enables my modified pencil to ride straight up along the edge of the template. It also works great for marking and then shaping inlays for my woodworking projects. — Tim Reese. How to cut circles with a band saw.


Disfrutar de la carpintería y del bricolaje y, además, tener las herramientas necesarias y de espacio para trabajar es un 'lujo'. No solo porque podemos dar rienda suelta a nuestra creatividad a la vez que disfrutamos de nuestra pasión, sino porque no habrá nada en el hogar que se nos resista. ¿Qué tenemos un problema o necesitamos resolver algo? ¡Acudamos al bricolaje!

Historically, woodworkers relied upon the woods native to their region, until transportation and trade innovations made more exotic woods available to the craftsman. Woods are typically sorted into three basic types: hardwoods typified by tight grain and derived from broadleaf trees, softwoods from coniferous trees, and man-made materials such as plywood and MDF.


Hardwoods, botanically known as angiosperms, are deciduous and shed their leaves annually with temperature changes.[8] Softwoods come from trees botanically known as gymnosperms, which are coniferous, cone-bearing, and stay green year round.[8] Although a general pattern, softwoods are not necessarily always “softer” than hardwoods, and vice versa.[9]

Commonly used woodworking tools included axes, adzes, chisels, pull saws, and bow drills. Mortise and tenon joints are attested from the earliest Predynastic period. These joints were strengthened using pegs, dowels and leather or cord lashings. Animal glue came to be used only in the New Kingdom period.[3] Ancient Egyptians invented the art of veneering and used varnishes for finishing, though the composition of these varnishes is unknown. Although different native acacias were used, as was the wood from the local sycamore and tamarisk trees, deforestation in the Nile valley resulted in the need for the importation of wood, notably cedar, but also Aleppo pine, boxwood and oak, starting from the Second Dynasty.[4]


The rubber cushion on my old palm sander was wearing thin around the edges. Because of its age, I couldn’t find a replacement pad. As I was drinking my beverage with a foam can cover around it, I realized I could cut the foam to fit the sander and glue it on. I peeled off the old pad, cleaned the metal base and attached the foam with contact cement. Works for clamp-on as well as stick-on sanding squares! You can find can covers at discount and convenience stores. — Allen J. Muldoon
Si no encuentras el sofá de tus sueños, ¡deja de buscar! Hoy te enseñamos a hacer uno con tablas de madera que, además, te servirá de cama. ¿Comenzamos? Para hacerlo necesitarás los siguientes materiales y herramientas: - Tablas de madera. - Sierra de calar. - Lija de mano o lijadora eléctrica. - Taladro con punta de destornillador. - tornillos largos especiales para madera. - Cola de carpintero. ...
Problems donating? | Other ways to give | Frequently asked questions | We never sell your information. By submitting, you are agreeing to our donor privacy policy. The Wikimedia Foundation is a nonprofit, tax-exempt organization. If you make a recurring donation, you will be debited by the Wikimedia Foundation until you notify us to stop. We'll send you an email receipt for each payment, which will include a link to easy cancellation instructions.
Sanding small items is tricky, as they’re hard to clamp in a vise to work on them. So instead of bringing the sandpaper to the workpiece, I bring the workpiece to the sandpaper. I glue sheets of sandpaper to a piece of plywood; 60 and 100-grit on one side and 150 and 220-grit on the other. Spray adhesive works well for this. Since there’s sandpaper on both sides, my sanding board doesn’t slide around on the bench. Check out these small projects!

For many of us, the moment we learned that a 2×4 board is actually 1.5 inches x 3.5 inches was simply mind-blowing. The reason for this apparent contradiction is that the board has been planed down to eliminate irregularities. At one point, many years ago, 2x4s actually were 2 inches x 4 inches, but their rough surfaces made them difficult to stock and handle. The old terms, such as 2×4 or 4×4, are still used, and are known as the “nominal” size of the board. These nominal sizes are used because they are easier to say and they stick to tradition. Now, thanks to a lawsuit, most big box stores list the nominal and actual sizes of lumber.
With an orbital sander and good sandpaper you can smooth wood evenly and easily with first-class results. When flush-sanding solid edge-banding, draw a squiggly line across the joint before sanding. The edge-banding will be slightly proud of the plywood veneer, so the pencil marks provide a visual aid to make sure that you’re sanding flat, and that you don’t sand through the plywood’s veneer. As you go, you can also test for a smooth, level transition by gently scraping your fingernails against the transition. If it’s smooth, your fingers will not catch on the seam between the two pieces
¿No te ha pasado alguna vez que ante la idea de tener que recoger la mesa de trabajo cuando estás a medias porque llega la hora de comer o cenar has descartado empezar un nuevo proyecto? ¡Estoy segura que sí! Por este motivo, un sueño recurrente de cualquier persona con las manos inquietas es ¡tener un taller! Luminoso, con espacio, materiales ordenados en armarios de cómodo uso, herramientas varias…

Un gran material, tanto constructivo como decorativo, que aporta no solo calidez, sino estilo y textura a cualquier superficie es la madera. Este noble material puede utilizarse de mil y un maneras distintas, siendo perfecto para elaborar los muebles de tu casa de manera simple y sencilla. Si te gustan los proyectos de DIY (Hazlo tu mismo), llama ya a tu carpintero para que te ayude a fabricar alguno de éstos muebles. ¡Manos a la obra!
When it comes to woodworking for beginners, there are 6 things that I think are essential to know for how to start woodworking. I’m going to discuss each of these tips in hopefully a really simple way to make it a breeze to understand, so you can get to the fun part of actually starting to woodwork! I wish when I started and was learning how to woodwork that I had a simple beginner tips guide like this one!

Tired of waiting for finish to dry on one side before finishing the other side? You can purchase standoffs, but it’s also really easy to make them yourself. Simply drive 2-in. drywall screws through 2-in. x 2-in. squares of 3/4-in. thick stock. The screw points will leave a divot in the finish that can be touched up later, but I always let the back side of my project rest on the screws while the finish dries. — Matt Boley. Plus: Check out these 32 other handy hints for frugal shop rats.
Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.
Lacking a jointer? Use reader Court Kites’ awesome tip to create perfectly matched glue joints on wavy or bowed board edges. Lay the boards on a flat surface, then clamp them across the middle with a bar clamp. Lay two 8-in. long by 1-3/4 in. wide scrap boards across each end and screw them in with four 1-1/4 in. long screws, two per board. Keep the screws well away from your future cutting line!
Para los módulos base, la altura generalmente es de 90cm desde el piso hasta la cubierta. Los módulos deben estar siempre separados del piso por temas de humedad, en una medida que se mueve entre los 10cm hasta los 15cm. Además, existen en el mercado una serie de patas regulables que permiten ajustar los pisos que no están 100% nivelados. Estos finalmente pueden ser cerrados con un zócalo que tiende a ser una pieza de aglomerado o terciado revestido con una formalita. El zócalo debe ir retranqueado mínimo 7,5cm del borde de las puertas. Existe la opción de dejar las patas a la vista aunque no lo recomendamos ya que tiende a ser un espacio donde se acumula polvo.

With two varieties, red and white, oak is known to be easy to work with and relatively strong. However, furniture makers often opt for white oak over red oak for its attractive figure and moisture-resistance.[12] Depending on the kind needed, oak can probably be found at a local home center or a lumberyard for a bit pricier than other hardwoods.[12][13]


Poner el triángulo en el banco de corte afirmado con prensas. Justo en la segunda línea hecha en los calados poner una guía de corte (trozo de madera que sobró de la plancha) que también va sujeto con las prensas. Hacer el corte con la fresadora, calzándola justo en la segunda línea. La fresa rebajará a cada lado de la línea 6,5 mm, dejando el calado de 13 mm de ancho, 1 mm más que el grosor de la madera que es de 12, ya que así se podrá hacer los ensambles con más facilidad.
Disfrutar de la carpintería y del bricolaje y, además, tener las herramientas necesarias y de espacio para trabajar es un 'lujo'. No solo porque podemos dar rienda suelta a nuestra creatividad a la vez que disfrutamos de nuestra pasión, sino porque no habrá nada en el hogar que se nos resista. ¿Qué tenemos un problema o necesitamos resolver algo? ¡Acudamos al bricolaje!
×